Window repairs can help homeowners save money and ensure their comfort. In the event of major damage, such as broken glass or a cracked frame, a window replacement could be required.
But there are many other issues that can be addressed to extend the life of your windows. Some common issues include:
Broken or cracked panes
Whether it’s an errant rock thrown by your lawnmower or a tree’s branch blown by high winds, damaged window glass isn’t just unattractive but can lead to higher electricity bills as the broken pieces allow cold air into your home. It’s fairly easy to fix windows that have broken panes.
Start by carefully removing glass with gloves and safety sunglasses. You may have use a utility knife to remove old glazing compound or Repair Window putty around the frame’s edges. Next, wipe down the glass’s surface and the frame’s wood with a soft cloth or paper towel.
After the area is cleaned then apply a waterproof silicone caulking on the frame’s perimeter. This will stop water from getting into the frame through the crack and cause further damage.
If you have double-pane glass, a bad crack could compromise the gas layer that lies between the panes, making your windows less efficient in insulating. If the crack is severe enough that it threatens the integrity of the window or the pane inside is not there, you may need to consult an expert.
Cracks in thermal stress can happen when there’s a dramatic difference in temperature between the inside and outside of your home, which causes the glass to expand or contract. If this happens across two portions of a window it’s recommended to replace the glass instead of trying to repair it.
If your windows are cracked and not yet ready to be replaced Clear tape can do a great job of securing the crack and keeping out bugs and cold air. You can cut an amount of nylon stocking big enough to completely cover the crack, and then attach it using duct tape. It’s not a solution that will last forever, but it works well in the event of a crisis and keeps cold air and insects out of your home. If your windows are older and you’re starting to notice cracks in the glass, it’s an excellent idea to talk with the local window company regarding whether replacing the entire window might be a better option for you.
Wood rot is a frequent problem with windows. It can alter the appearance of a home and it can also pose danger to your safety. However, it is possible to repair window wood that has rot. First, you must determine the root of the wood rot. Examine for leaks in the roof and other areas where water could get into the wood.
Next, you will need to take out any rotten parts of the window frame. This can be done using the claw hammer, chisel, or rasp. After removing the decayed wood, you’ll have to replace it with new wood. It is recommended that you use pre-treated wood for this project as it is more resistant to decay. If you are unable replace the wood damaged by rot then you can use filler or wood hardener to help strengthen the damaged area. This kind of product will be found in a lot of hardware stores. Follow the directions on the label of the product to ensure the best results.
After you have repaired the damaged areas of the window sill, it’s important that you protect the area. Apply a water-resistant sealant to the wood. A product like Sikkens is a good choice for this job.
You can also use a two-part epoxy filler to shield the wood from further damage. It is simple to apply and gives an excellent finish. It is crucial to follow the directions on the label. After the epoxy filler dries it is possible to sand the surface of the wooden. It is best to begin with a rough grade of sandpaper and then move to a smoother grade.
The final thing you would like to do is make the area that has been damaged by exposed to more water. It is recommended, therefore, to protect the surface you have repaired with an oil-based primer that will protect it from moisture. Then, you can apply the wood sealant, which is waterproof.
There are a variety of reasons windows don’t open. The house may have settled, or the wood frames could have warped during rainy weather. Somebody may have secured them with a nail for security. But with some patience and the right tools, many windows that are locked can be opened.
One of the most common causes of windows that isn’t able to open is the accumulation of gunk or debris on its moving parts. Acme Glass notes that dirt and grime build up over time on the sliding tracks, hinges and locks. In addition, metal hardware is prone to rust when it comes into contact with humidity or direct sunlight. Maintaining these areas lubricated by spray grease can prevent the oxidation process and ensure that your window is operating correctly.
Stuck windows could be caused by the breaking or loosening of the pulleys that are used to raise and lower the window. These parts can be weakened and obstructed when they are placed higher than two floors higher than the surface.
If you have trouble opening a door, use a pry-bar to gently push the window open. Place a block of wood on the frame to give your pry bar more leverage, and be careful not to damage the window or wood. Try applying a hairdryer along the frame’s edges for a few minutes. This will warm the wood, making it easier to move.
Another issue with windows that don’t open is a broken spring that prevents the window jamb from rising or lowering. You’ll need to check your owner’s guide for more details depending on the person who made your windows.
If you have tried cleaning the moving parts of your windows and then lubricating them but they’re still unable to open it could be the right time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don’t let your windows slide from functional to inoperable, as windows that aren’t properly shut can make your home vulnerable to water damage and burglary. Contact us today to learn more about our replacement upvc windows repair and services!